Alpine Status High-Resolution 5-Channel Power Amplifier
Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.
If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.
All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).
 |
Hi-Res Audio Made Accessible The Alpine Status system features many technologies, components and materials of the AlpineF#1Status system to achieve ultra high-precision music reproduction – at an affordable price tag. It is designed to play music tracks at 192kHz / 24bit format, which are widely accessible in many online stores and streaming platforms. High-Res Audio playback of 192kHz / 24bit allows Alpine Status to create a heightened listening experience in the vehicle that emulates the feeling of an intimate recording studio session. |
 |
Class-D Mono Power Amplifier The HDA-M80 Mono Power Amplifier features a Class-D amplification circuit with Sierra-H technology (see below for more details on Sierra-H). It features an RMS power output of 1x 500 Watts @ 4Ohm or 1x 800 Watts @ 2Ohm and a frequency response of 8Hz to 400Hz (-3dB). |
 |
Excellent Sound Quality Alpine Status amplifiers feature many audiophile technologies and selected high-end components to reproduce excellent sound quality. A copper shield keeps electromagnetic interferences away from the black PCB board, to ensure best audio reproduction. The Signal to noise ratio is >107dB. |
 |
Sierra-H Circuit After the original analog sound wave is converted to a digital signal and amplified, the Sierra-H circuit compares and corrects the amplified signal with the original waveform twice, to reproduce a highly accurate signal without any gaps. |
 |
One-Sided Terminal All connections (power supply, speaker outputs, RCA inputs / outputs and the remote bass knob connector), as well as all fuses are located on the down-side of the amplifier. This makes it much easier to achieve a clean installation in your vehicle. You can connect the RUX-KNOB2 for subwoofer level control (in bridged mode channel 3 + 4). |
 |
Power and Speaker Connectors All Alpine Status amplifiers feature power supply and speaker terminal connectors for easier installation and handling. The very compact connector design features screw terminals and allows clean and simple installation with lossless connectivity. |
 |
 |
| FEATURES: | |
| GENERAL | CHANNEL DESIGN: 5/4/3 CHANNEL CLASS-D AMPLIFICATION CIRCUIT POWER SUPPLY AND SPEAKER CHANNEL CONNECTORS COPPER-PLATED CHASSIS TOP CONTROL PANEL (BELOW TOP COVER) BLACK CIRCUIT BOARD NON-SHUTDOWN DESIGN THERMAL PROTECTION ONE-SIDED TERMINAL BLUE POWER LED COMPATIBLE WITH RUX-KNOB2 BASS CONTROLLER (FOR SUBWOOFER CHANNEL) |
| SPECIFICATIONS: | |
| RMS POWER RATINGS | PER CHANNEL INTO 2 OHMS, 14.4V: 4 X 100W + 1 X 500W PER CHANNEL INTO 4 OHMS, 14.4V: 4 X 75W + 1 X 300W BRIDGED INTO 4 OHMS, 14.4V: 2 X 200W |
| SOUND TUNING | CROSSOVER: VARIABLE HPF, 50-400HZ (-12DB/OCT ) CROSSOVER: VARIABLE LPF: 50-400HZ (-24DB/OCT ) SUBSONIC FILTER (SUBWOOFER): 8-40 HZ (-24DB/OCT) |
| GENERAL | INPUT SENSITIVITY (RCA INPUT): HI: 0.5V – 10V / LOW: 0.4V – 10V FREQUENCY RESPONSE (+0, -3DB: 1W INTO 4 OHMS) FOR CH-1/2/3/4: 10HZ – 30KHZ FREQUENCY RESPONSE (+0, -3DB: 1W INTO 4 OHMS) FOR CH-5: 8HZ – 300HZ THD+N (@ 10W INTO 4 OHMS): ≤0.02% DAMPING FACTOR: CHANNEL 1/2/3/4: >500, CHANNEL 5: >1000 WEIGHT: 3.9KG |
| DIMENSIONS | WIDTH 291 MM HEIGHT 53.5 MM DEPTH 189.5 MM |
